Serial Bagmakers Side Clip Connectors With D Rings 1/2 (12MM) One Pair

With these side clips you can easily add a shoulderstrap or purse chain to your wallets and clutches. These clips are sturdy and easy to install.
Sold as a pair (one left and one right side piece, a total of two clips).
Side Clip Connectors are available in the following colours:
Antique Gold
Black
Nickel
Iridescent Rainbow
Rolled Brass
Rose Gold
Measurements:
Width at widest: 1/2 or 12 mm
Total Length including ring: 1 3/4 or 44 mm
Channel gap (width of opening): 3/16 or 4 mm
The fabric must be able to compress to 3/16 (4 mm) for the clip to slide on.
INSTALLATION: Easy to install. Use a regular small cross screw driver.
Slide over the edge of your wallet or clutch. If the fabric is too thick, press it down with pliers or compress down with a rubber mallet.
Always start the holes with an awl and only then screw in screws.
You can use a thread locking liquid or glue to secure the screws, and some glue to adhere the metal pieces.