Nylon Tubular Wear Sleeves for Slings | 10″ Overall Width | 36″ Long

A sling rigged across single-leg and double-leg roundslings alike needs a wear sleeve that isn’t used up in one spot after a handful of lifts. A nylon tubular sling sleeve also attaches with Velcro, and its tubular shape uses more of its material than a quick sleeve, though it does not carry the abrasion resistance a Cordura sleeve does.

Key Features

• Durable nylon webbing construction; does not provide abrasion resistance
• Velcro closure for fast attach and removal
• Tubular design uses more usable material than a quick sleeve of the same size
• Single leg roundslings: types 3, 4 & 5
• Double leg roundslings: types 1, 2 & 3
• Wire rope diameter: 2-1/4 – 2-1/2″
• Chain size: 3/4″

Applications

• General-purpose sling protection at a lower cost than an abrasion-resistant sleeve
• Slings that see occasional contact wear rather than constant abrasive contact, where a tubular nylon wear sleeve is enough
• Crews that want a nylon tubular sling sleeve they can reposition as it wears rather than replacing it outright

Sleeve Inspections

Inspect the sleeve regularly and before each use. If you notice any damage, excessive wear, or an unreadable warning tag, remove the sleeve from service immediately.

ASME Guidance

“Slings in contact with edges, corners, protrusions, or abrasive surfaces shall be protected with a material of sufficient strength, thickness, and construction to prevent damage.” – ASME B30.9 (2021) 9-5.10.4(d)