Nylon Sewn Wear Pads for Slings for 2″ Webbing | 36″ Long

Once a sling steps up from single-ply to double-ply, or gets rigged in a double-leg roundsling configuration, the wear points on it multiply, and this sewn wear pad is sized to cover both. This nylon sewn wear pad wraps and stays sewn to both sides of the sling, sliding along its length for easy repositioning and quick inspection, at a lower cost than an abrasion-resistant fabric.

Key Features

• Durable nylon webbing construction; does not provide abrasion resistance
• Sewn on both sides for a secure, non-slip fit
• Slides along the sling’s length for easy repositioning and quick visual inspection
• 1-ply and 2-ply sling width: 2″
• 3-ply and 4-ply sling width: 1″
• Single leg roundslings: type 3
• Double leg roundslings: types 1 & 2
• Wire rope diameter: 7/8 – 1-1/8″
• Chain size: 9/32 – 3/8″

Applications

• General-purpose sling protection where abrasion resistance isn’t a priority
• Budget-conscious rigging setups that still want a sewn nylon sling pad rather than an unsecured wrap
• Slings that see occasional contact wear rather than constant abrasive contact, where a nylon sewn wear pad is enough

Sleeve Inspections

Inspect the sleeve regularly and before each use. If you notice any damage, excessive wear, or an unreadable warning tag, remove the sleeve from service immediately.

ASME Guidance

“Slings in contact with edges, corners, protrusions, or abrasive surfaces shall be protected with a material of sufficient strength, thickness, and construction to prevent damage.” – ASME B30.9 (2021) 9-5.10.4(d)