Dremel 111 1/32″ 0.8mm Engraving Cutters

Engraving Cutter. Quality cutters for detail engraving, carving and routing in wood, fiberglass, plastic and soft metals. One cutter included.
Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals
For wood, fiberglass, plastic & soft materials
Not for use with hardened materials
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics
1/8″ shank
User Tips
Secure objects to a stable surface while working.
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
If chattering occurs, increase speed.
BIT DIAMETER INCH: 1/32″
BIT DIAMETER MM: 0.8 mm