CRL 316 Brushed Stainless Z-Series Flat Surface Mount Square Type Glass Clamps for 13/16″ Glass

• For Use with Square Tubing or Other Flat Surfaces
• 316 Alloy Stainless Steel
• For 13/16″ (20.6 mm) Glass (Flat Surface Mounting)
• Use Tempered Laminated Glass

CRL Brushed Stainless Z-Series Flat Surface Mount Square Type Glass Clamps for 13/16″ (20.6 mm) Tempered Laminated Glass.

SPECIFICATIONS:
Glass Thickness:13/16″ (20.6 mm)
Base Design:Flat
For Use With:Square Tubing or Other Flat Surfaces
Material:316 Alloy Stainless Steel
Glass Fabrication:One 7/8″ (22 mm) diameter finger notch is required. The included steel pin must be used for 13/16″ (20.6 mm) Laminated Glass applications.
Includes:Rubber Gaskets and Steel Pin
Replacement Hardware:CRL P612 for Replacement Screws

Product Warning:

For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.