CornerMax Cut-Resistant Sling Protection Sleeve for 2″ Webbing | 36″ Long

Sharp edge sling protection usually means picking between a bulky sleeve that won’t flex or a thin one that won’t hold up. A CornerMax sling protector splits the difference: Dyneema fiber that bends around round or curved loads and still carries a real cut-resistance rating.

Key Features

• Sized for 1-ply and 2-ply synthetic slings up to 2.5 inches wide
• Not rated for wire rope or chain slings
• Full 90 degree contact against the load edge is what unlocks the rated protection level
• Inside circumference of 5-1/4 inches; measure your round sling’s full circumference (both sides together) before ordering

Applications

• Smaller-diameter pipe, rounded bar stock, or narrow curved edges where a slim cut resistant sling sleeve fits better than a wide one
• Pairing with a synthetic roundsling to add a cut-resistant rigging sleeve at the contact point, right where a CornerMax sling protector belongs
• Rigging jobs that repeat often enough that edge protection needs to hold up over time, not just survive one lift

ASME Guidance

“Slings in contact with edges, corners, protrusions, or abrasive surfaces shall be protected with a material of sufficient strength, thickness, and construction to prevent damage.” – ASME B30.9 (2021) 9-5.10.4(d)