Cordura Sewn Wear Pads for Slings for 12″ Webbing | 24″ Long

At the top of the size range, this sewn wear pad is built for the widest slings in a rigging setup, where only a double-leg type 13 roundsling configuration applies. This Cordura sewn wear pad wraps and stays sewn to both sides of the sling, so it slides along the length for easy positioning and quick inspection instead of staying fixed in one spot.

Key Features

• Cordura fabric construction, abrasion-resistant for long-term use on the same sling
• Sewn on both sides for a secure, non-slip fit
• Slides along the sling’s length for easy repositioning and quick visual inspection
• 1-ply and 2-ply sling width: 12″
• 3-ply and 4-ply sling width: 10″
• Double leg roundslings: type 13

Applications

• Slings that stay in service long enough that abrasion resistance actually pays off over repeated use
• Rigging setups needing a Cordura sewn wear pad that can be repositioned for inspection without removing it
• Jobs where the sling contact point needs real long-term protection, not just a one-time barrier

Sleeve Inspections

Inspect the sleeve regularly and before each use. If you notice any damage, excessive wear, or an unreadable warning tag, remove the sleeve from service immediately.

ASME Guidance

“Slings in contact with edges, corners, protrusions, or abrasive surfaces shall be protected with a material of sufficient strength, thickness, and construction to prevent damage.” – ASME B30.9 (2021) 9-5.10.4(d)