4″ x 4′ Endless Twin-Path High Performance Roundsling | Vertical Cap: 40,000 lbs.

A 4 inch endless HMPE sling steps up the capacity range while keeping the same continuous-loop design that lets you rotate the contact point as it wears. An endless twin path roundsling, this twin-path endless lifting sling and endless HMPE sling is stronger than a comparably sized wire rope or chain sling at only about 10% of the weight, easier for riggers to handle, and a good fit for fragile cargo since it’s synthetic. This highest-capacity model carries a 40,000 lb. vertical capacity.

Key Features

• Two independent paths of K-Spec core yarn, each a standalone connection between hook and load, run under a protective outer jacket
• A Covermax jacket built from two layers of industrial-grade nylon protects the core, with over four times the abrasion resistance of polyester
• Repairable if the jacket is damaged but the core yarns are unharmed
• Check-Fast inspection system flags core yarn damage or overload at a glance
• Non-conductive, non-corrosive, water-resistant, UV-resistant, and load-conforming
• 1% elongation at rated capacity; load-tested to 200% of capacity
• Meets ASME B30.9 standards; temperature range -40F (-40C) to 180F (82C)

Applications

• The heaviest structural, precast, or industrial lifts this line covers
• Multi-rigger jobs that would otherwise call for heavy wire rope
• Lifts where the two independent K-Spec paths’ backup protection is worth the added cost

Complete Your Sling Setup

Finish your lifting setup with the right supporting hardware and protection. Add sling protection to help guard against abrasion, edges, and wear, and pair your sling with a properly rated wide body shackle such as the Crosby G-2160 Bolt Type Wide Body Shackle or Van Beest Green Pin P-6033 Wide Body Sling Shackle.

View Product Safety Warnings