3″ x 4′ Twin-Path Sparkeater High Performance Roundsling | Vertical Cap: 20,000 lbs.

At 3 inches, this twin path sparkeater sling is the lightest entry point into a completely different Twin-Path construction, built for heat rather than raw capacity alone. This twin path sparkeater sling, also called a sparkeater high temp sling, high temperature roundsling, or twin-path sparkeater roundsling, is rated from -40F (-40C) up to 300F (149C), well above a standard synthetic sling’s range, making it a heat resistant lifting sling for environments where wire rope or chain isn’t the right fit either. This heavier-duty model carries a 20,000 lb. vertical capacity.

Key Features

• Sparkeater construction uses two independent paths of Aramid heat-resistant core yarn under a protective Nomex outer jacket
• Nomex jacket, a spark resistant sling cover that’s both heat- and flame-resistant, protects the core fibers from damage
• Repairable if the jacket is damaged but the core yarn is unharmed
• Tattle Tail inspection system gives a helpful visual indication of sling overload
• Non-conductive, non-corrosive, water-resistant, and UV-resistant
• Load-tested to 200% of capacity and meets ASME B30.9 standards
• Lightweight like other high performance roundslings, for easier handling than wire rope or chain of equal capacity

Applications

• Heavier hot-environment rigging where wire rope or chain isn’t practical
• Foundry, forging, or hot-metal handling jobs needing real heat resistance
• Jobs where the Nomex jacket’s flame resistance is a real requirement, not a nice-to-have

Complete Your Sling Setup

Finish your lifting setup with the right supporting hardware and protection. Add sling protection to help guard against abrasion, edges, and wear, and pair your sling with a properly rated wide body shackle such as the Crosby G-2160 Bolt Type Wide Body Shackle or Van Beest Green Pin P-6033 Wide Body Sling Shackle.

View Product Safety Warnings