CRL Z-Series Square Type Flat Base Zinc Clamp for 3/8″ Glass

• For 3/8″ (10 mm) Glass
• Replacement Gaskets are Available by Ordering Cat. No. Z38SG
• For Use on Mezzanines, Partitions, Railings and Windbreaks
• Use Monolithic Tempered Glass
• Steel Pin Available for Additional Glass Support
• Custom Painted Finishes Available Upon Request

ThisCRL Z-Series Square Type Flat Base Glass Clampis designed to be used on glass thickness of 3/8″ (10 mm). The flat base allows for installation onto Square Tubing or other flat surfaces. Material is constructed of Zinc Casting with a Powder Painted finish. The Clamps include an optional Steel Pin for additional weight support. These Clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8), use CRLsZB0LTSocket Head Cap Bolt andZRNUTRivet-Nut. For installation, drill a 17/32 (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16 Mandrel and Nosepiece.

NOTE:1/2″ (12 mm) hole is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS:
Glass Thicknesses:For 3/8″ (10 mm).
Base Design:Flat
For Use With:Square Tubing or Other Flat Surfaces
Material:Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication: