CRL Z-Series Round Type 1-1/2″ Radius Base Stainless Steel Clamp for 1/4″ and 5/16″ Glass

• For 1/4″ and 5/16″ (6 and 8 mm) Glass
• Use on Mezzanines, Partitions, Railings and Windbreaks
• Use Monolithic Tempered Glass
• Steel Pin Available for Additional Glass Support
• Custom Painted Finishes Available Upon Request

OurCRL Z-Series Round Type Radius Base Glass Clampsare designed to be used on glass thickness of 1/4″ up to 5/16″ (6 to 8 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

For securing the Z-Clamp to thin wall tubing (less than 1/8), use CRLsZB0LTSocket Head Cap Bolt andZRNUTRivet-Nut. For installation, drill a 17/32 (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16 Mandrel and Nosepiece.

NOTE:1/2″ (12 mm) notch is required if using the steel pin (included with the clamp) for additional glass support. Replacement gaskets are available by ordering CRL Cat. No. Z14RG.

SPECIFICATIONS:
Glass Thicknesses:For 1/4″ and 5/16″ (6 and 8 mm).
Base Design:Radius
For Use With:1-1/2″ or 2″ (38 or 50.8 mm) Diameter Round Tubing
Material:Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
Glass Fabrication: