CRL Single Glass Shelf Support

• For 3/16″ to 3/8″ (5 to 10 mm) Thick Tempered Glass
• Available in Three Finishes
• Rubber Rings Cushion Glass

ThisCRL Single Glass Shelf Supportis very easy-to-install, and keeps either glass, acrylic or wood shelves firmly in place with three rubber cushion rings that also prevent scratching or chipping of shelf. The Support requires a 1/4″ (6 mm) drilled hole in the side panel, and works with glass thicknesses from 3/16″ to 1/4″ (5 to 6 mm).The included 1/4″-20 threaded rod may be replaced with either longer threaded rods (AS14 Series) for thicker non-glass substrates or Hanger Bolt (HB14 Series)for attaching directly into a wood stud.

Wood & metal substrates require a 1/4″ (6 mm) diameter thru-hole in order to accept the threaded stud of the Shelf Rest. When attaching to glass panels, a 3/8″ (10 mm) hole is required. The 1/4″-20 threaded rod may be replaced with a Hanger Bolt for attaching directly into a wood stud.

Note:Intended for use on 3/16 to 1/4″ (5 to 6 mm) tempered glass, or metal or wood side panels