12″ Grooved LiftGuard Magnetic Sling Protector | 1/2″ Groove | For 10″W Slings

Lifting steel plate or I-beam stock puts a standard sling protector in an awkward spot, since there’s no flat face for it to grip. This 12 inch grooved magnetic sling protector, part of the LiftGuard line, is built to seat directly onto a plate edge or beam flange, with a groove sized to match and magnets that hold it in place through the lift.

Key Features

• High-Performance Cast Nylon (HPCN) construction, about 1/7th the weight of steel
• Groove sized to fit matching plate edges or I-beam flanges
• Recessed magnets hold the protector in place without marking painted surfaces
• Built for use with slings up to 10 inches wide
• Operating range from -20F to 220F

Applications

• Lifting steel plate, I-beam, or other flanged stock with synthetic slings
• Jobs that need a fast, tool-free sling protector that seats to a specific edge profile
• Repeat lifts where a magnetic attach point speeds up rigging between picks

ASME Guidance

“Slings in contact with edges, corners, protrusions, or abrasive surfaces shall be protected with a material of sufficient strength, thickness, and construction to prevent damage.” – ASME B30.9 (2021) 9-5.10.4(d)