Cordura Quick Sleeve Sling Protection for 5″ Webbing | 12″ Long

At this size, a sling is often shared across more than one rigging setup in a shift, and a quick sleeve that reattaches in seconds keeps up with that pace. This Cordura quick sleeve sling protector attaches with Velcro, so it comes on and off in seconds instead of staying sewn to one sling for good.

Key Features

• Cordura fabric construction, abrasion-resistant
• Velcro closure for fast attach and removal, ideal for moving the sleeve between slings
• 1-ply and 2-ply sling width: 5″
• 3-ply and 4-ply sling width: 4″
• Single leg roundslings: types 9 & 10
• Double leg roundslings: types 6 & 7
• Wire rope diameter: 1-5/8 – 2-1/4″
• Chain size: 5/8″

Applications

• Crews that reassign the same velcro sling protection sleeve across multiple slings in a shift
• Jobs where a Cordura quick sleeve sling protector needs to come off fast for inspection, then go right back on
• Rigging setups where sewing a sleeve permanently to one sling doesn’t make sense

Sleeve Inspections

Inspect the sleeve regularly and before each use. If you notice any damage, excessive wear, or an unreadable warning tag, remove the sleeve from service immediately.

ASME Guidance

“Slings in contact with edges, corners, protrusions, or abrasive surfaces shall be protected with a material of sufficient strength, thickness, and construction to prevent damage.” – ASME B30.9 (2021) 9-5.10.4(d)